published date : feb 25, 2008 drawing no : sdsa3798 v5 checked : b.l.liu p.1/5 part number: ZURUY56W 3.0x1.0mm right angle smd chip led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.specifications are subject to change without notice. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZURUY56W red gaasp/gap water clear 4 11 627 yellow gaasp/gap 2.6 5 590 140 features z 3.0mmx1.0mm right angle smt led, 2.0mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant . absolute maximum ratings (t a =25c ) ur (gaasp /gap) uy (gaasp/ gap) unit reverse voltage v r 5 5 v forward current i f 30 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 140 ma power dissipation p t 75 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 ur (gaasp/ gap) unit forward voltage (typ.) (i f =20ma) v f 2.0 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 627 nm wavelength of dominant emission (typ.) (i f =20ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 45 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c ) uy (gaasp/ gap) 2.1 2.5 10 590 588 35 20
published date : feb 25, 2008 drawing no : sdsa3798 v5 checked : b.l.liu p.2/5 part number: ZURUY56W 3.0x1.0mm right angle smd chip led lamp www.sunled.com ? ur
published date : feb 25, 2008 drawing no : sdsa3798 v5 checked : b.l.liu p.3/5 part number: ZURUY56W 3.0x1.0mm right angle smd chip led lamp www.sunled.com ? uy
published date : feb 25, 2008 drawing no : sdsa3798 v5 checked : b.l.liu p.4/5 part number: ZURUY56W 3.0x1.0mm right angle smd chip led lamp www.sunled.com ? tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications.
published date : feb 25, 2008 drawing no : sdsa3798 v5 checked : b.l.liu p.5/5 part number: ZURUY56W 3.0x1.0mm right angle smd chip led lamp www.sunled.com packing & label specifications ZURUY56W
|
